在使用液压升降平台http://www.rgsjpt.com/之前，我们需要对液压升降平台架体结构做全面检查，下面石家庄悦翔机械制造的有关专家给大家介绍一下液压升降平台使用之前应该检查哪些部位。

1、检查液压升降平台架体结构，应查看基础及标准连接螺栓紧固情况，螺栓按规定设置双螺帽或弹簧垫，各部位焊缝完好无裂痕。
Check hydraulic lifting platform frame structure, you should review the basis and standard bolts fastening bolts required to set double nuts or spring pads, each part of the weld intact without cracks.

2、附着杆件应按照说明书要求的材质、规格设置，不应任意更改，附着杆间距应符合说明说要求，一般为6m一道，液压升降平台附着杆的连接方式及紧固方式应按说明书要求执行，不应随便变更。
Shall be in accordance with the instructions attached to the rod material requirements and specifications set should not be any change, attached to the rod spacing requirements shall comply with instructions say, a general execution of 6m, connections hydraulic lifting platform attached to the rod and fastening requirements shall be specified, should not be changed casually.

3、安全过程中发现，液压升降平台http://www.rgsjpt.com/有用钢筋代替螺旋，钢筋两端分别焊个钢筋头代替螺帽的现象，这种做法是非常危险的，所以不能减少成本而且对客户部负责任。
Security process found useful reinforced hydraulic lifting platform instead of a spiral, the ends were welded reinforced steel head instead of a nut phenomenon, this practice is very dangerous, it can not reduce the cost and responsibility of the client department.