欢迎光临济南瑞高升降机械有限公司 官网!

产品质量保障,精益求精! 家用电梯 液压货梯 装卸平台
☎️全国服务热线

132-5673-2123

联系瑞高机械获取技术指导>>

联系我们

济南瑞高升降机械有限公司

联系人:陈经理
固话:0531-84258588
固话:0531-84317678
手机:132-5673-2123
手机: 131-5611-6589
传真:0531-84315677
天津办事处:133-1203-9579
北京办事处:186-2236-9916
河北办事处:18622084399
邮箱:tjheliyeya@126.com
网址:http://www.rgsjpt.com
在线客服:和我交谈!和我交谈!
地址:山东省济南市济阳区旺旺街

悦翔固定升降机对轴承材料的要求

文章出处:admin 人气:370次 发表时间:2022-11-15 09:57:38

悦翔固定升降机http://www.rgsjpt.com/轴承的主要失效形式是磨损、咬粘(胶合)、工作表面刮伤,受变载荷时也会 发生疲劳破坏或轴承减摩层脱落,此外润滑剂被氧化而生成的酸性物质。固定升降机轴承的主要失效形式是磨损、咬粘(胶合)、工作表面刮伤,受变载荷时也会发生疲劳破坏或轴承减摩层脱落,此外润滑剂被氧化而生成的酸性物质和水会对轴承材料产生腐蚀。
Yue Xiang fixed lift bearing main failure mode is wear, seizure (glued), work surface scratches, also occurs when fatigue failure or by varying load bearing friction layer off, in addition to lubricant is oxidized to form an acidic substance. Fixed lifts bearing the main failure mode is wear, seizure (glued), work surface scratches, also occurs when fatigue failure or by varying load bearing friction layer off, in addition to lubricant is oxidized to form an acidic substance and the water will bearing material corrosion.

悦翔固定升降机http://www.rgsjpt.com/对轴承材料性能的基本要求是与轴颈配合后应,具有良好的减摩性、耐磨性、磨合性和摩擦相容性,其中磨合性是指轴承材料在短期轻载的磨合过程中形成相互吻合的表面粗糙度、减小摩擦和磨损的性能;摩擦相容性是指防止轴承材料与轴颈材料发生粘附或防止轴承和轴颈烧伤的性能。具有足够的强度,包括抗压、抗冲击和抗疲劳强度。具有良好的摩擦顺应性和嵌入性。摩擦顺应性是指轴承材料靠表面的弹塑性变形来补偿滑动表面初始配合不良的性能;嵌入性是指轴承材料容许外来硬质颗粒嵌人而避免轴颈,表面刮伤或减轻磨粒磨损的性能。一般硬度低、弹性模量低、塑性好的材料具有良好的摩擦顺应性,其嵌入性也较好。
Yue Xiang basic requirement for fixed lifts bearing material properties after mating with the journal should have good anti-friction, wear resistance, running and friction compatibility, which refers to the break-bearing material in the short run - light load the process of formation of the surface roughness of the mutual agreement, reducing friction and wear performance; compatibility means preventing friction bearing material and journal material adhered or prevent the occurrence of the journal bearing and burn performance. Have sufficient strength, including compressive strength, impact and fatigue strength. Compliance with good friction and embeddedness. Compliance friction bearing material by means of plastic deformation to compensate for surface sliding surfaces with poor initial performance; embedding refers bearing material to allow foreign hard particles embedded avoid journal, surface scratches or mitigate abrasive wear performance. Low general hardness, low elastic modulus, plastic material has good friction good compliance, its embeddedness better.

济南瑞高升降机械有限公司

地址:山东省济南市济阳区旺旺街

固话:0531-84258588 固话:0531-84317678    手机:132-5673-2123    手机:131-5611-6589

@Copyright 2025 - 2030 济南瑞高升降机械有限公司All rights reserved 备案号:鲁ICP备15028546号

扫一扫,免费体验电控解决方案

二维码1 二维码1 二维码2 二维码2
销售热线

132-5673-2123

公司固话

0531-84258588

微信二维码

在线客服